JET 708663PK JTAS-10XL50-W1 10-Inch Left Tilt 3-Horsepower 10-Inch Cabinet Saw with 50-Inch Xacta II Fence, 2 Cast Iron Extension Wings, Table Board, and Legs, 230-Volt 1-Phase Review
See more picture
JET 708663PK JTAS-10XL50-W1 10-Inch Left Tilt 3-Horsepower 10-Inch Cabinet Saw with 50-Inch Xacta II Fence, 2 Cast Iron Extension Wings, Table Board, and Legs, 230-Volt 1-Phase Feature
- 3 hp, single-phase, 230-volt motor
- Left-tilting blade
- Large 27-by-40-inch table
- 50-inch total rip capacity, 12-inch left-of-blade rip capacity
- Two-year limited warranty
While this JET saw beats its closest competitor on price, it also offers some advantages in terms of design and construction. Placing the quick-connect electrical plug right at the saw so the user doesn't have to search out the wall socket for every blade change is just one small example of JET's attention to detail. The stand for this saw is made of a heavy-gauge metal, and features a hinged motor cover and a 4- inch dust port for easy connection to a dust-collection system. A change in the hole pattern on the fence rails means lefties can shift the set up to their preference. The left-tilting arbor is another mark in this saw's favor. Tilting the blade away from the fence negates the need for a sacrificial fence and reduces the risk of the piece binding under the blade. This saw's most impressive feature is the smooth action of the blade height-adjustment mechanism. Not only will users save their wrists and knuckles, but they'll also save time by being able to crank the blade to the exact height necessary with vastly fewer test runs for every rabbet, dado, tongue, and groove. Finally, we really appreciate JET's use of totally enclosed fan-cooled motors on this and every other saw the company makes. While this may add a little to the final cost of the saw, the extra life and reliability this gives the motors is well worth it. This saw is an excellent choice in its price range.
--Nancy Gleason
The JET XACTASAW 10in. Table Saw boasts a powerful 3 HP motor and exclusive 50in. commercial XACTA fence II with T-square design. This XACTASAW is left tilt with a wide-stance, heavy-duty trunnion for stability and smooth blade positioning. Powder coated for a long-lasting, chip-resistant finish. HP: 3, Max. RPM: 4,200, Amps: 14.5, Arbor Size (in.): 5/8, CFM: Dust Collection Min CFM Required: 350, Blade Diameter (in.): 10, Motor Phase(s): 1, Motor Voltage: 230 (prewired 230V), Port Size (in.): 4in. O.D. dust port for increased dust collection efficiency, Max. Depth (in.): Max Depth of Cut: 3in., Table Dimensions W x L (in.): 20 x 27, Extensions (qty.): 2, Material Type: Cast iron and metal, Finish Type: Powder coat, Assembly Required: Yes
Check price now
Feb 09, 2012 09:37:05
No comments:
Post a Comment